Site plans for Lockyer Valley, Queensland: drawn in minutes
Need a site plan for a shed, patio, carport, deck, pool or granny flat in Lockyer Valley? Site plans and assessments in minutes, drawn over the real lot.
Towns and suburbs in Lockyer Valley include Gatton, Laidley, Withcott, Plainland and Helidon.
Building in Lockyer Valley
For sheds and other domestic outbuildings, Lockyer Valley's planning scheme steps aside completely and lets Queensland's state siting code set both height and setback. One local twist remains: a shipping container or shed used as a dwelling or an outbuilding must be modified to look residential.
A dwelling house, including a secondary dwelling, is accepted development in most zones where the dwelling house code is met. In the urban zones and on rural residential land, setbacks are simply those of the state code, while in the rural zone the house and its outbuildings sit well back from all boundaries. A secondary dwelling has a floor area cap, larger outside the residential and township zones, no more than two bedrooms, sits close to the house and shares its open space, driveway, crossover and service connections, with three car spaces on the lot.
Sewer build-over is decided by Urban Utilities. Applications in Gatton, Laidley, Withcott and Plainland can be lodged through eServices.
What we hold for Lockyer Valley
For Lockyer Valley we hold the council’s own rules for:
- sheds, garden sheds, garages and carports
- patios, pergolas, louvred roofs, decks and shade sails
- pools, fences and retaining walls
- granny flats
- driveways, water tanks and shipping containers
We also hold its current fee schedule.
Build-over of sewer and water assets is decided by Urban Utilities.
At each lot we check the state’s mapping for flood, bushfire, landslide, heritage and native vegetation. We also read the council’s application register for past applications on the lot.
Last checked
How approval works in Queensland
In Queensland a building certifier, usually a private one, gives the building approval for work on a house lot, and the council comes in for the parts it controls. The smallest structures are accepted development and need no building approval when they meet the state's standards. Anything larger needs building approval, and a structure that sits closer to a boundary or the street than the siting rules allow also needs the council's agreement to a siting variation; an overlay or the zone in the council's planning scheme can add a planning approval on top. The certifier and the council read the site plan for where the structure sits against each boundary, the house and any easement. Its size, its height and its distance to each boundary decide which way it goes, as per the Queensland Housing Code and the Building Regulation 2021.
Drawing the plan
Type the property address, the lot’s real boundaries load from official land records in Queensland, and you place the structure over the aerial view. The plan prints to scale with boundary lengths, setback distances, a north arrow, a legend, a site coverage table and a title block, as the site plan for a building approval or a DA.
What a certifier in Lockyer Valley will ask you
How deep is the pool?
The depth decides whether the water needs a barrier, and the barrier has to be in place before the pool is filled. The barrier is what gets inspected, so the sheet shows where it runs and every gate with its swing.
Is the patio a pergola, a louvred roof or a solid roof?
An open pergola and a roofed patio are treated differently near the boundary, and louvres that shut to shed water count as a roof. Roofed, it also adds to the site cover total on the sheet.
Is the lot in an overlay, and what is the zoning?
A flood, bushfire, heritage or character overlay can bring a planning approval on top of the building approval, and the zone decides which of the council’s rules apply. The mapped overlays are read at the lot as the structure goes on the plan.
Are there easements, sewer mains or other services?
Work near a sewer or water main goes to the asset owner before the certifier can sign it off, on a timeline of its own. Mapped easements and mains show on the lot as it loads.
The figures for your own lot are read in a minute, from its address.
Every question a certifier asks is on the Queensland page.
Changes on the way
Rule changes announced for Lockyer Valley, for Queensland and for the whole country, the state and national lines in full on the Queensland page, each with the page that says so and the day we read it.
In the next 90 days
Nothing due in the next 90 days that we know of.
Later
-
National Construction Code 2025
Source qbcc.qld.gov.au, read
-
ABCB Housing Provisions 2025 (with NCC 2025)
Source abcb.gov.au, read
-
AS 1926.1:2024 Swimming pool safety barriers
Source ncc.abcb.gov.au, read
-
NCC 2025 Housing Provisions Part 10.8
Source ncc.abcb.gov.au, read
-
NCC 2025 Housing Provisions Part 9.2
Source ncc.abcb.gov.au, read
-
NCC 2025 Volume Two Part H6, Specification 42 and Housing Provisions Section 13
Source ncc.abcb.gov.au, read
-
NCC 2025 Volume Two Part H8
Source ncc.abcb.gov.au, read
-
State Planning Policy (draft)
Source statements.qld.gov.au, read
-
National Construction Code, residential pause
Source treasury.gov.au, read
-
Queensland Housing Code
Source business.qld.gov.au, read
-
National Construction Code, next edition
Source abcb.gov.au, read
-
No date yet
State-wide Bushfire Hazard Area (Bushfire Prone Area) mapping, published 2026
Source tiles.arcgis.com, read
-
No date yet
AS 3959:2018 Construction of buildings in bushfire prone areas
Source store.standards.org.au, read
-
No date yet
AS 4678-2002 Earth retaining structures
Source store.standards.org.au, read
What we changed for Lockyer Valley
No change to the rules we hold for Lockyer Valley yet.
Council notices
No story for Lockyer Valley yet.
The sources we read for Lockyer Valley
3 sources read for Lockyer Valley, the newest on , each below with the day it was last read.
Planning schemes and codes
Fees
-
Lockyer Valley fees and charges 2026-27
No change
-
No change
Follow Lockyer Valley in a feed reader: www.rapidsiteplan.au/site-plan/lockyer-valley/feed.xml. Every council and state has one, listed on rule changes by council and state.
RapidSiteplan is design software: you confirm details, measure on site and your certifier or council makes the approval decision. The rule above is general information, not building or legal advice. Boundaries shown are indicative, a surveyor is recommended where exact positions matter.
Plans for the job
Questions people ask
More councils in Queensland